Hexagon All Metal Hotend – 3D Printer – UK Stock

Hexagon All Metal Hotend

Ex Tax: £32.50
Brand: RepRapDiscount
Product Code: HEXAGON
Availability: In Stock

Available Options

* Voltage:
* Filament Diameter:
* Nozzle Size:
* Mounting Plate:
* Bowden Kit:
* Fan Kit:

Hexagon All Metal Hotend


This is the original hexagon hotend designed and manufactured by Reprapdiscount. This hotend has been on the market for many years and over time has undergone small changes now making it a truly lost cost and reliable all metal hotend for printing a wide range of materials. The hexagon 3d printer hotend is of a completely all metal design, this means it is capable of achieving print temperatures up to 300°C, alongside standard filaments such as PLA & ABS, its can just as easily print high temperature materials such as Nylon's & Polycarbonates.

Hexagon All Metal Hotend
Hexagon Hotend Silicone Cover

Compared to other all metal hotends on the market, the Hexagon only has an overall length of 55mm and heat sink width of 19mm, and only weighs 25g.

A new addition to the hexagon hotend is a silicone cover which helps to maintain a constant printer temperature, which is especially helpful when your printer has an active print cooling system.


The hexagon all metal hotend is very simple to assemble. Simply tighten the nozzle to the heater block. Then tighten the heater block to the heatsink. Slide the silicone sleeve over the heater block, and attach the cartridge heater using the provided grub screw. Finally push the thermistor through the hole in the silicone sleeve as far as it will go. The silicone sleeve alone will hold the thermistor in place, but it is recommended that you also wrap 5mm Kapton tape around the heater block to secure it further. The most important step is to heat the 3d printer hotend and re-tighten the heater block to the heatsink.

In addition to the tools provided with the kit, you will also need a 7mm spanner for the nozzle, and adjustable wrench for the heater block.


1.75mm and 3.00mm are both universal direct drive or bowden, this gives you the freedom to change your up printer without having to by a new hotend.

Our kit options above give you the flexibility to customise our Hexagon kit to suit your needs, including filament/nozzle size, mounting options, extruder drive, and fan options.

What You Will Be Getting

1 x Hexagon Hotend With Brass Nozzle of chosen sizes

1 x Cartridge Heater
1 x 100K EPCOS Thermistor With Extension Wire

1 x M2 6mm SCHS Screw
1 x M3 Grub Screw

1 x Silicone Sleeve

1 x 4.5mm Spanner
1 x 1.5mm Allen Key

(Optional) Mounting Plate

(Optional) Bowden Kit Which Includes:
2 x Pneumatic Couplings
1m x PTFE Tubing
(All sized appropriately)

(Optional) Fan Kit Which Includes:
1 x 40mm Fan
1 x 25mm Fan
These only come in 12V.

Write a review

Your Name:

Your Review:

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:


A revolution is coming… one where our 2D thoughts are turned into 3D realities and where you have full control of your creative experiments, with a little help from an online expert community that loves to share what we do. Ooznest is a proud cog in that machine - supplying the 3D printing community with what they need to grow and thrive.


  • 01277523171
  • sales@ooznest.co.uk



Copyright © Ooznest Ltd 2018 - All Rights Reserved