This Full Graphic LCD Smart Controller gives your RepRap 3D Printer the ability to print without being connected to a computer. All actions such as Calibration, Axes Movement and Initiating Print from a G-Code design stored on the SD Card can be done from the LCD Panel.
The Full Graphic LCD Smart Controller contains an SD Card Reader, Rotary Encoder and a 128x64 Dot Matrix LCD Display. The Smart Controller can be easily connected to your RAMPS Board using the “Smart Adaptor” Included.
To make the Full Graphic LCD Smart Controller work, follow the instructions under "Marlin V1 (new)" here: www.reprap.org/wiki/Full_Graphic_Smart_Controller
What You Will Be Getting
- 1 x Full Graphic LCD Smart Controller
- 1 x Smart Adaptor
- 1 x 25-30cm Cable
- (Optional) 1 x 4GB SD Card
Note: HTML is not translated!
Rating: Bad Good
Copyright © Ooznest Ltd 2016 - All Rights Reserved