Filter

Micro Limit Switch Mounting Kit

Name: Micro Limit Switch Mounting Kit
SKU: 12999
Availability: InStock
Rating: 4.67 (9 reviews)

Brand:Ooznest

Rated 4.67 out of 5 based on 9 customer ratings

(9 customer reviews)

1 .0 - Limit Switch Variant

Clear

£3.70 - £5.20 (Inc VAT)

SKU: N/A Categories: Endstops, Mounts Tags: kit, limit, switch

Micro Limit switches are a simple but effective solution to stop an axis on a machine from travelling out of limits. They are also used to find a home position, also known as a datum.

They are mechanically operated with terminals: common (C), normally open (NO), and normally closed (NC).

You would typically connect the ground pin on your controller’s limit switch input to the C terminal, and the signal pin to either NO or NC.

Signal to NC in most situations is preferred because if any of the wires are broken, it will be classed as triggered by the controller.

In addition to the micro limit switch, this kit includes the hardware to mount a micro limit switch in a range of orientations to aluminium extrusion with a 6mm slot.

What you will be getting

1 x Micro Limit Switch*

1 x Micro Limit Switch
1 x Micro Limit Switch Mounting Plate
2 x M3 8mm Plastite Screws
1 x M5 8mm Low Profile Bolt
1 x M5 Drop In tee Nut

*The un-soldered terminals version some with bare terminals to attach your own wires. The pre-soldered variant comes with 2500mm silicone wires connected in the normally closed configuration with a Molex connector.

Technical Specification

Un-soldered

Terminations	Common (C), Normally Open (NO), Normally Closed (NC)
Switch Dimensions	20 x 11 x 6mm
Mounting Hole Diameter	2mm
Centre to Centre Mounting Hole Spacing	9.5mm

Pre-soldered

Termination	Common (C) and Normally Closed (NC)
Switch Dimensions	20 x 11 x 6mm
Mounting Hole Diameter	2mm
Centre to Centre Mounting Hole Spacing	9.5mm
Wire Length	2500mm
Controller Connector	Molex 22-01-1032 Pin 1 - Ground Pin 2 - Empty Pin 3 - Signal

Micro Limit Switch Mounting Plate

Downloads

3D Model (STEP)

9 reviews for Micro Limit Switch Mounting Kit

Rated 4 out of 5

Ville K (verified owner) – 15th April 2021

Ordered 3 sets with pre-soldered terminals. one limit switch arrived broken, it seems visually ok but there is no “click” like other two switches. otherwise that price is good
Rated 5 out of 5

Tom-Erik (verified owner) – 15th March 2021

Easy and nice service
Rated 5 out of 5

paul rothwell (verified owner) – 28th September 2020

Easy to fit
Rated 5 out of 5

patrick hayes (verified owner) – 3rd March 2020

Great service and product
Rated 5 out of 5

Gareth Martin (verified owner) – 3rd February 2020

High quality limit switch mounting
Rated 4 out of 5

MARIA GEORGIOU (verified owner) – 25th September 2019

Nice product
Rated 4 out of 5

S.Fulford (verified owner) – 4th September 2019

Good kit, only issue found is that with both the screws holding the limit switch to the mounting plate it does not sit flush against the extruded at certain orientations. removing 1 of the screws allowed it to sit flush.
Rated 5 out of 5

Edward Swallow (verified owner) – 6th August 2019

Does what it’s made for
Rated 5 out of 5

Wayne Hooper (verified owner) – 11th June 2019

Got my machine back up and running in no time