Getting your 3D Prints to stick is one of the most frustrating parts of 3D Printing. Trying all types of techniques, such as kapton tape, hairspray, or glue, just never seen to be adequate enough. LokBuild is Steelmans3D solution to this problem. LokBuild is an easy to apply build surface that ensures 3D Models adhere, but can be easy removed.
LokBuild can be easily cut to the exact size of your print area, and simply sticks using a heat resistant adhesive backing. It removes the need to use any other techniques to make prints stick, but allows easy part removal. LokBuild is being constantly tested with new materials, here is a list of successfully tested materials: ABS, PLA, HIPS, PET, CF-XT, CF-nGen, Polycarbonate, Ninjaflex, and more…
Similar solutions relying on the nozzle height being perfectly accurate, to high and the model will not stick, too close and the print is impossible to remove. LokBuild is much more durable and much more forgiving, making the level of calibration a simpler process.
Why lokbuild?
| Size | 203x203mm Orange, 305x305mm Orange, 432x432mm Orange |
|---|
Documentation
16 reviews for LokBuild
Only logged in customers who have purchased this product may leave a review.
Related products
Sale!
Out of stock
£40.55
Ex VAT: £33.79
Ex VAT: £33.79
Taxes Calculated at Checkout
Sale!
(2)
£15.31
Ex VAT: £12.76
Ex VAT: £12.76
Taxes Calculated at Checkout
(1)
From: £13.50
Ex VAT: £11.25
Ex VAT: £11.25
Taxes Calculated at Checkout
(30)
From: £10.00
Ex VAT: £8.33
Ex VAT: £8.33
Taxes Calculated at Checkout
kev (verified owner) –
Great for abs, hard to remove petg.
Mr Richard Blake (verified owner) –
Its hard to explain how this print bed differs from the one that was originally on the factory print bed but it definitely feels a bit thicker and has more texture. i have done about 4 or 5 prints and i havent had to use any adhesive. that might change depending on what i am printing. the big question is how long it will last v cost. but so far im impressed.
Anthony Mudd (verified owner) –
Helps me print stuff – pla sticks well to the bed.
Mr Richard Blake (verified owner) –
Early days but compared to the old build surface lokbuild does seem to be better quality. it was dead easy to attach and so far the prints that i have done have stuck really well. time will tell as to how long it will last.
Paul Kensler (verified owner) –
Lokbuild s durable, easy to clean and easy to install. very easy to trim down to match my build plate size using a box knife on a cutting mat. but i won’t be using it because pla adheres too strongly and is difficult to remove even after adjusting gap, layer height, turning bed heating off, etc. i contacted the manufacturer for advice; they were responsive but their advice didn’t make a difference. the product is too difficult to work with so i’ll be using something else. the seller oozenest is great!
Roderick Stewart (verified owner) –
Great printing bed – easy to apply and long lasting
Neil Smith (verified owner) –
This is my third, they last a decent amount of time and have fixed my issues of bed adhesion.
Craig Tibbles (verified owner) –
Best adhesion from this surface. if anything, too good.
Thomas Turner (verified owner) –
Perfect as always
tony rowell (verified owner) –
Awesome product,prints stick so much better to this than any other surface
Thomas Turner (verified owner) –
Seems to work well albeit dialing in a good start height is more tricky, as if you set it to low you will have difficulty getting the part detached from the bed.
Ian Smith (verified owner) –
Great bit of kit works well
Jason Matthews (verified owner) –
Best build plate I’ve had
Robert Csiszar (verified owner) –
These are great mats for your 3d printer!
great for all filament types. abs sticks to it like glue so little to no warping.
would recommend if you are looking for a surface that all filaments will stick to lokbuild is what i use and have had no reason to look for an alternative.
Robert Csiszar (verified owner) –
These are great mats for your 3d printer!
great for all filament types. abs sticks to it like glue so little to no warping.
Steven V (verified owner) –
Awesome product!! love it!!