E3D Volcano Silicone Sock Boot – Genuine | UK

Customer Notice

From the 25th - 28th September, some of the Ooznest team are at the TCT Show 2017. Due to this there will be some delays in answering phoncalls and emails. During this period the best way to contact us would be by email. However we promise to get around to everything, it just may take longer than usual. Thanks Ryan Lock - Ooznest.

E3D Volcano Silicone Sock

E3D Volcano Silicone Sock

£2.60
Ex Tax: £2.17
Brand: E3D Online
Product Code: E3D-V-SC
Availability: In Stock
Qty:

Available Options

* Quantity:
Total:

E3D Volcano Silicone Sock

The new E3D Silicone sock is the most requested addition to their line up of 3D Printer hotends. The silicone sock will keep your hotend free from burnt blackened plastic. Not only does the silicone sock keep your hotend clean they help to stabilise the temperature control.

Manufactured from a non stick heat resistant silicone, the silicone sock will repel the build up of molten plastic. Sticky materials like co-polyesters will no longer be a problem.

Temperature stability will also see a huge boost with these new E3D Silicone socks. Usually when cooling a print, stray airflow will also interact with the nozzle, and effect your printing temperature. These silicone socks reduce the radiation of heat from the hotend, while also aiding the cooling of the print, enabling superb overhangs and bridges to be printed.

Volcano Silicone Sock

Superior Geometry

Volcano Silicone Sock Nozzle

The E3D Volcano Silicone socks simply push over the heater block, no assembly/disassembly is required. The Volcano socks will be tight when cold, but once the hotend has heated up they will expand to the correct size. The E3D Volcano silicone socks will fit all sizes from 0.40 – 1.20mm.

The life time of the Volcano Silicone socks varies depending on what material you are printing. With abrasive materials they should last at least 100+ Hours. With less sticky materials and gentle use, they could have an infinite life.

Note that these silicone socks only work with the new cartridge temperature sensor based heater blocks. They have a maximum operating temperature of 300C.

Write a review

Your Name:

Your Review:

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

About

A revolution is coming… one where our 2D thoughts are turned into 3D realities and where you have full control of your creative experiments, with a little help from an online expert community that loves to share what we do. Ooznest is a proud cog in that machine - supplying the 3D printing community with what they need to grow and thrive.

Contact

  • 01277523171
  • sales@ooznest.co.uk

Twitter

Facebook

Copyright © Ooznest Ltd 2017 - All Rights Reserved