uStepper NEMA23 Mount

The uStepper motor controller was originally designed for NEMA17 Stepper motors, however, this mount makes it possible to mount the uStepper onto the back of NEMA23 Stepper motors.

Requirements

For this mount to work with your NEMA23 Stepper motor, it needs to have 4 holes.

They should be spaced, centre to centre, 51mm apart on the top and bottom sides, and 32mm on the left and right sides.

They need to be M3 with a depth of 1.8mm

The centre hole should be 10mm in diameter, and the shaft should be aligned with the bearing to give a depth of roughly 4mm.

Most NEMA23 Stepper Motors will meet these requirements including all the motors we stock.

What you will be getting

• uStepper NEMA23 Mount (Hardware is included)