about
Borosilicate glass is not like normal glass. With borosilicate glass the main constituents are silica and boron trioxide. This combination gives borosilicate glass very low coefficient of thermal expansion, this makes it resistant to thermal shock and thermal stresses. Historically borosilicate glass is commonly used to make test tubes, however with the advent of 3D Printers, it has found a new application.
An ideal 3D Printer build surface needs to be perfectly flat, and glass is a good candidate for this. However normal window glass will expand under the temperature fluctuations of a 3D Printer heated bed. If it is constrained around the edges (i.e bulldog clips) this can cause it to bow in the Z Direction and effect your print quality; even worse it will crack. Using borosilicate glass overcomes these pitfalls from using normal glass, and is the ideal solution for 3D Printer build platforms.
We can guarantee that the glass we sell is genuine borosilicate glass, many suppliers of so called borosilicate glass, are in fact supplying soda lime glass. The difference can be easily spotted, soda lime has a blue tinge around the edges, whereas borosilicate glass has a slight yellow tinge.
the glass you have always wanted
With hundreds of printers now available with a large variety of different bed sizes we realised that every 3D Printer owner will want a bespoke size. Furthermore genuine borosilicate glass is very hard / impossible to cut using traditional scoring techniques.
Therefore we now offer a borosilicate glass cutting service and have invested in the machinery needed to precisely cut borosilicate glass to the exact size that you require for your 3D Printer. Once we have cut the glass we chamfer the edges to insure there is no chance of fingers getting hurt.
In addition we recognize that many printer designs have a bolt head in each corner of the printer platform, this prevents you from using a piece of square glass that maximizes your build envelope. So you no longer waste them extra few millimeters, we are also offering an optional corner chamfering service.
How To use our cut to size service
x & y dimensions
Looking at the diagram to the right, measure the X and Y Dimensions of your print platform and enter them into the input boxes above labeled X Dimension (mm) and Y Dimension (mm).
The biggest size we can cut is 400x400mm.
Chamfer
Chamfer is the process of cutting off the corners of the glass plate to accommodate the bolt heads. Measure the C Dimension in the diagram to the right. The chamfers will be cut at 45 Degrees, so make sure the C Dimension is big enough that the 45 Degree cut edge will not hit the bolt. Enter your measured C Dimension into the input box labeled Chamfer – C Dimension (mm).
You could also use this chamfer service to create octagonal plates for circular build plates.
Georgios Tsililis (verified owner) –
Excellent product
Georgios Tsililis (verified owner) –
Excellent product
André Filipe Pereira Gonçalv (verified owner) –
Good product … well packed
JamesPenney (verified owner) –
Product was cut perfectly, good soft edges.
L J Richmond (verified owner) –
Delivered safely and quickly, good product sofar and many prints to come from it. and a pleasant team to deal with from start of order to the end thank you.
you are on my go to list.
Morris (verified owner) –
Made precisely to my spec and shipped promptly and very securely packaged.
RManc (verified owner) –
Great product, prompt delivery and excellent packaging.
Gary Lewis (verified owner) –
Perfectly flat and my prints adhere well
Mark Brenchley (verified owner) –
Great service with rapid delivery. the borosilicate glass is just what we need for laboratory test purposes.
Andrew Allshorn (verified owner) –
Need bigger sizes and should be the cost you can get it from a glass supplier
David (verified owner) –
This is a fantastic product, it’s high quality glass and was cut to my requirements.
Martin Holt (verified owner) –
Perfect for my requirements.
Nathan Dumont (verified owner) –
Cut to size with a wonderfully clean and safe edge. beats my diy attempts in the past easily.
Kevin Pawsey (verified owner) –
Custom cut and chamfered, perfect fit, exactly to the size requested. glass is very good quality, and came extremely well packed. if you are looking for replacement glass for your build bed, this is the one that you want. there is no patterning or anything on the surface, just perfectly flat glass, great for adhesion.
gordon (verified owner) –
Nice and flat holds prints nicely and good price too
Tony (verified owner) –
Good flat buildplate
Samuel Harold-Sodipo (verified owner) –
Great job
absolutely no qualms
Daniel (verified owner) –
Ordered 2 plates, cut down to 260mm x 260mm. they arrived very quickly are are perfectly cut.
Jason Joyner (verified owner) –
The custom 3d printer glass bed was cut correctly to size and sent in one day. the only negative is the box it came in was way larger than needed. however, it was wrapped and snug (packaging paper) inside the large box. would highly recommend.
RManc (verified owner) –
Glass plate arrived promptly and well packaged.
Thomas Brading (verified owner) –
Cut was smooth and spot on to size.
Rich (verified owner) –
Great product rounded edges are amazing
Graham Welland (verified owner) –
Excellent quality and service.
Joseph BAYLEY (verified owner) –
Good Product
Nigel Bennee (verified owner) –
Excellent service. I broke my build plate and needed a replacement fast. Even in these strange times a new one arrived the next day.
josh pleavin (verified owner) –
Product seems like great quality
Will Gleave (verified owner) –
Really nice bit of glass, corners are sharp for sure if you don’t go with filleting, but definitely not enough to cut you or cause harm, if i was to buy it again i’d probably get the filleting though. glass is super flat as advertised, printer works flawlessly now as long as the bed is nice and level.
thanks!
Mr DENBIGH (verified owner) –
Just as stated in list.
Jamie Waters (verified owner) –
Perfect cutting and fit for my ender 2.
Max (verified owner) –
The ronseal of glass plates.