Sale!
Clearance – E3D v6 Stainless Steel Nozzle
Brand:E3D Online
** END OF YEAR CLEARANCE SALE **
HURRY WHILE STOCK LASTS
Ends 1st January
The E3D v6 Stainless Nozzles are medical grade and food safe, making them the ideal candidate for them sensitive applications. These are full integrated into the E3D ECO System, and will fit the V6, Lite6, & Titan Aero
Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat.
SUPERIOR GEOMETRY
The new internal geometry of the E3D v6 nozzle has brought together community feedback and extensive testing. The new nozzles have been designed from the ground up, and have been optimised to reduce back-pressure, ease filament flow, and improve retractions.
The bottom flat surface of the nozzle flattens down the layer of plastic, for each nozzle size this has been customised. On the smaller nozzles, a small tip gives high precision. Whereas on the larger nozzle, a large flat tip improves the finish when printing large layers.
All nozzles are now identifiable by the markings seen on the flats of the hex head. See the table below to identify each nozzle.
NUMBER OF DOTS
DIAMETER
0
0.25mm
3
0.40mm
5
0.80mm
Drawings
Documentation
1 review for Clearance – E3D v6 Stainless Steel Nozzle
Only logged in customers who have purchased this product may leave a review.
Related products
Sale!
Sale!
(1)
£12.37 (Inc VAT)
This product has multiple variants. The options may be chosen on the product page
Sale!
(12)
£15.37 (Inc VAT)
This product has multiple variants. The options may be chosen on the product page
Sale!
(2)
£9.90 (Inc VAT)
This product has multiple variants. The options may be chosen on the product page
Sale!
Sale!
(1)
£2.70 (Inc VAT)
This product has multiple variants. The options may be chosen on the product page
£23.00 - £35.00 (Inc VAT)
This product has multiple variants. The options may be chosen on the product page
Sale!
SvenReindl1 (verified owner) –
Got this to print some food grade bits with my standard PLA and later on some Bio Material. Used to printing with brass nozzle so after swapping to SS nozzle I had to crank up the temps a bit. It would actually print the standard gcode I used for the brass nozzle but suffers from stringing and the PLA print is brittle.
I adjusted the temp for PLA all the way up to 245 °C and now it prints like a dream and the prints are really hard despite they are PLA ^-^
Really recommend for someone who doesn’t mind additional testing. For me it was only the temp I had to adjust for my desired object.