High torque
The high torque series have been specially designed to accept a 9mm wide belt for use with our high torque reducer applications. These come in either a 1/4″ variant to go on the motor shaft. Or 8mm to go on an ACME Lead Screw.
NEW! Aluminium Extrusion Profiles
30 , 40 , 45 Series Available Now -- Check Them Out
Dismiss
2GT-3mm Pulley 20 Tooth
Pitch | 3mm |
Teeth | 20 |
Max Belt Width | 6mm |
Total Width | 17.6mm |
Bore | 6.35mm |
Flange | Double |
Material | Aluminium |
2GT-3mm Pulley 20 Tooth – High Torque – 1/4″ Bore
Pitch | 3mm |
Teeth | 20 |
Max Belt Width | 9mm |
Total Width | 20.65mm |
Bore | 6.35mm |
Flange | Double |
Material | Aluminium |
2GT-3mm Pulley 20 Tooth – High Torque – 8mm Bore
Pitch | 3mm |
Teeth | 20 |
Max Belt Width | 9mm |
Total Width | 20.65mm |
Bore | 8.00mm |
Flange | Double |
Material | Aluminium |
Only logged in customers who have purchased this product may leave a review.
W.D. Van Vliet (verified owner) –
Good fit no problems
Mr Alexander Burnett (verified owner) –
Well made, close to overpriced
Mr Alexander Burnett (verified owner) –
In the case of my motors the bore was too small, however i didn’t use the issue motors but 3 i already had. i had purchased this pully to finally sort out the ongoing problem i was having with an allan key for the pully i had. in the event the grub screw was a size i already had an allan key for, so i drilled out the central hole and now consider the over, somewhat obliquely but sorted.
Leslie Dodd (verified owner) –
No problems. Does exactly what it was supposed to!
Albin (verified owner) –
Good quality