Choosing the right end mill is a must for any serious machining work. Having the correct end mill helps to determine the quality, accuracy, and time of a finished part. Investing in a premium cnc end mill at the beginning can save money in the long run, by completing jobs quicker and being tolerant to more abuse.
We have searched high and low for a quality supplier at affordable prices. Our end mills are manufactured from sub micron grain solid carbide using the latest material technology.

The Essential End Mills For You
This starter kit includes what we believe are the end mills that every CNC Machinist should have in their arsenal. 1/4″, 1/8″ & 1/16″ Square End 2 Flutes and 1/4″, 1/8″ & 1/16″ Ball End 2 Flutes, and a 90 Degree Engraver 2 Flute. Save 15% off the individual price by buying our starter set.
Type | Cut Diameter (D) | Shank Diameter (d) | Cut Length (L) | Bit Length (BL) | Reach (R) | Flutes | Angle (A) |
Square Up Cut | 1/4″ (6.35mm) | 1/4″ (6.35mm) | 1/2″ (12.7mm) | 5/2″ (63.5mm) | 2 | ||
Square Up Cut | 1/8″ (3.175mm) | 1/8″ (3.175mm) | 0.375″ (9.525mm) | 3/2″ (38.1mm) | 2 | ||
Square Up Cut | 1/16″ (1.5875mm) | 1/8″ (3.175mm) | 0.188″ (4.7752mm) | 2.0″ (50.8mm) | 0.590″ (14.986mm) | 2 | |
Ball Up Cut | 1/4″ (6.35mm) | 1/4″ (6.35mm) | 3/4″ (19.05mm) | 5/2″ (63.5mm) | 2 | ||
Ball Up Cut | 1/8″ (3.175mm) | 1/8″ (3.175mm) | 0.375″ (9.525mm) | 3/2″ (38.1mm) | 2 | ||
Ball Up Cut | 1/16″ (1.5875mm) | 1/8″ (3.175mm) | 0.188″ (4.7752mm) | 2.0″ (50.8mm) | 0.590″ (14.986mm) | 2 | |
Engraver | 0.05″ (1.27mm) | 1/8″ (3.175mm) | 3/2″ (38.1mm) | 2 | 90 |
See the diagram below to correlate the dimensions. The dimension Reach is only applicable to the extended reach end mills, as for the stub and standard end mills the reach is the same as the cut length. Also if the Cut Diameter and the Shank Diameter are the same then the Reach dimension also isn’t of much concern, even for the extended reach end mills. 1/4″ cut mill is not available in the extended reach version.
Christian C (verified owner) –
Great value for money, good quality mills for a fair price
Fred (verified owner) –
Bon produit
Silvan –
There is nothing to say
Robert Sweetness (verified owner) –
They work as required.
Tautvydas Dulskis (verified owner) –
Eu power plug is in africa is eu power plug
EAJ (verified owner) –
Working as advertised
Brian Carter (verified owner) –
Good choice!
Brian Carter (verified owner) –
Good tools!
JD (verified owner) –
Good quality tools. not cheap but very well made
Mr David Sanderson (verified owner) –
Need a 1/8 collet or bush to use the 1/8″ tooling supplied.
david stanbrook (verified owner) –
Excellent
Matthias G. (verified owner) –
Good set for first millings
OLIVIMAGES (verified owner) –
They do the job, a good quality/price report for beginning
Filiberto Maria Festa (verified owner) –
I still didn’t try them
customer –
Very solid quality, with excellent range of mills.
Dean Wood –
Excellent quality endmill selection, they all look sharp and will hopefully hold an edge for a long time.
jeroenzonneveld –
Really good starter kit! it is a great selection of different mills for carving, cutting and engraving, but be aware that the set uses 1/4 and 1/8 collet sizes.
Robert_Sims –
Great starter set
Rob French –
Just what i needed
great service from ooznest
Panayiotis Nikolaou –
Great starter kit
joanne hudson –
Great company so helpful!