WorkBee Replacement Z-Axis 1500x1500mm Micro Lever Limit Switch (2155mm Length)

Reset Selection
Customise
There are no customisation options for this product.
Create A Bundle

There are no bundled options for this product.

QuantityUnit PriceDiscount
Selected price:1+£3.600%

£3.60 (Inc VAT)

315 in Stock
Delivery
Next Day
Click & Collect
Not Available
Returns
30 Days

WorkBee Replacement 1500x1500mm Z-Axis Micro Lever Limit Switch (2155mm Length) is a pre-assembled plug-and-play Micro Lever Limit Switch for replacing the Z-Axis Micro Lever Limit Switch on your WorkBee CNC machine. Designed specifically for the 1500x1500mm WorkBee model, this cable comes pre-wired with a Micro Lever Limit Switch on one end and a controller connector on the other, ensuring a quick installation with no soldering or modification required. Its length is tailored for optimal routing within your machine’s cable management system, maintaining a tidy and efficient setup.

Key Features

  • Plug-and-Play Compatibility: Pre-wired with a Micro Lever Limit Switch on one end and a controller connector on the other, no soldering needed.
  • Correct Length: 2155mm cable is sized for clean installation on 1500x1500mm WorkBee machines.
  • Z-Axis Specific: Designed for direct replacement of the Z-axis Micro Lever Limit Switch on the WorkBee CNC Machine.

Compatibility

By default, this limit switch is designed to be mounted using two M2.5 bolts. However, if your WorkBee is pre-Z1+, your existing limit switch may be mounted with M3 bolts instead.

If you have M3 bolts, you can still use this limit switch, you’ll need to drill out the mounting holes using a 3mm drill bit so your existing bolts fit.

Brand

Ooznest

Wire Length (mm)

2155

Stock Type

New

Wire Conductor Size (mm2)

0.25 (24AWG)

Weight (g)

21.10

Wire Insulation Material

Silicone

Version

Z-Axis – 1500x1500mm

Limit Switch Type

Mechanical

For WorkBee Models

1.0, 2.0, 2.1, 2.2, 2.2.1, 2.3, 2.3.1, Z1+

Actuating Type

Lever

For WorkBee Axis

Z

Contact Configuration

Normally Closed

For WorkBee Sizes (mm)

1500×1500

Maximum Voltage (V)

250

Controller Side Connector

Molex 22-01-1032

Maximum Current (A)

3

Controller Side Pinout

COM – Blank – NC

WorkBee Replacement Z-Axis 1500x1500mm Micro Lever Limit Switch (2155mm Length) x1

Delivery

  • Free UK Mainland Shipping: Orders over £120 Incl. VAT qualify for free next day shipping.
  • Same Day Dispatch: Orders placed before 13:00 are dispatched the same day.
  • Worldwide Shipping: Available for international orders.

For more details, visit Delivery Information

Returns

  • 30-Day Return: Items can be returned within 30 days of delivery.
  • Condition: Must be in original packaging and ‘as-new’ condition.
  • Refunds: Issued after inspection, excluding original shipping costs.
  • No Exchanges: Only refunds are provided.
  • Return Costs: Customers bear return postage costs and should use a tracked service.

For more details, visit Returns

4.3
3 reviews
5 Stars
2
4 Stars
0
3 Stars
1
2 Stars
0
1 Stars
0
  1. Sarah Bishop

    Just what I needed and super fast delivery

    4 years ago
  2. FabLab Wageningen

    Works as advertised. A good replacement for a original limit switch which was lost due to wiring being damaged by a drag chain. But here’s the issue: the wiring is way too thin and too thinly isolated for rugged use. Any – even very small – aberration in mounting and the wiring will get damaged again and you need to go though the replacement process again. A sturdier design and make would just be soo much better….

    4 years ago
  3. Jonathan Gomez

    Good üëç product

    5 years ago
Description

WorkBee Replacement 1500x1500mm Z-Axis Micro Lever Limit Switch (2155mm Length) is a pre-assembled plug-and-play Micro Lever Limit Switch for replacing the Z-Axis Micro Lever Limit Switch on your WorkBee CNC machine. Designed specifically for the 1500x1500mm WorkBee model, this cable comes pre-wired with a Micro Lever Limit Switch on one end and a controller connector on the other, ensuring a quick installation with no soldering or modification required. Its length is tailored for optimal routing within your machine’s cable management system, maintaining a tidy and efficient setup.

Key Features

  • Plug-and-Play Compatibility: Pre-wired with a Micro Lever Limit Switch on one end and a controller connector on the other, no soldering needed.
  • Correct Length: 2155mm cable is sized for clean installation on 1500x1500mm WorkBee machines.
  • Z-Axis Specific: Designed for direct replacement of the Z-axis Micro Lever Limit Switch on the WorkBee CNC Machine.

Compatibility

By default, this limit switch is designed to be mounted using two M2.5 bolts. However, if your WorkBee is pre-Z1+, your existing limit switch may be mounted with M3 bolts instead.

If you have M3 bolts, you can still use this limit switch, you’ll need to drill out the mounting holes using a 3mm drill bit so your existing bolts fit.

Specifications
Brand

Ooznest

Wire Length (mm)

2155

Stock Type

New

Wire Conductor Size (mm2)

0.25 (24AWG)

Weight (g)

21.10

Wire Insulation Material

Silicone

Version

Z-Axis – 1500x1500mm

Limit Switch Type

Mechanical

For WorkBee Models

1.0, 2.0, 2.1, 2.2, 2.2.1, 2.3, 2.3.1, Z1+

Actuating Type

Lever

For WorkBee Axis

Z

Contact Configuration

Normally Closed

For WorkBee Sizes (mm)

1500×1500

Maximum Voltage (V)

250

Controller Side Connector

Molex 22-01-1032

Maximum Current (A)

3

Controller Side Pinout

COM – Blank – NC

Delivery & Returns

Delivery

  • Free UK Mainland Shipping: Orders over £120 Incl. VAT qualify for free next day shipping.
  • Same Day Dispatch: Orders placed before 13:00 are dispatched the same day.
  • Worldwide Shipping: Available for international orders.

For more details, visit Delivery Information

Returns

  • 30-Day Return: Items can be returned within 30 days of delivery.
  • Condition: Must be in original packaging and ‘as-new’ condition.
  • Refunds: Issued after inspection, excluding original shipping costs.
  • No Exchanges: Only refunds are provided.
  • Return Costs: Customers bear return postage costs and should use a tracked service.

For more details, visit Returns

Reviews (3)
4.3
3 reviews
5 Stars
2
4 Stars
0
3 Stars
1
2 Stars
0
1 Stars
0
  1. Sarah Bishop

    Just what I needed and super fast delivery

    4 years ago
  2. FabLab Wageningen

    Works as advertised. A good replacement for a original limit switch which was lost due to wiring being damaged by a drag chain. But here’s the issue: the wiring is way too thin and too thinly isolated for rugged use. Any – even very small – aberration in mounting and the wiring will get damaged again and you need to go though the replacement process again. A sturdier design and make would just be soo much better….

    4 years ago
  3. Jonathan Gomez

    Good üëç product

    5 years ago