Original WorkBee Replacement Limit Switches
Brand:Ooznest
£2.50
Ex VAT: £2.08
Taxes Calculated at Checkout
These cables are sized for a screw-driven WorkBee. If you need them for an OX or belt-driven WorkBee the limit switches are in the same position, so the same options below are applicable.
Replacement Limit Switch and Cable for the Original WorkBee CNC Machine. The connector for the controller is included and pre-attached. The wire is pre-attached to the limit switch.
What you will be getting
- 1 x Original WorkBee Replacement Limit Switch for the axis and machine size chosen.
| WorkBee Limit Switch | X-Axis – 500x500mm, X-Axis – 500x500mm / 750x750mm / 750x1000mm, X-Axis – 1000x1000mm / 1000x1500mm, X-Axis – 1500x1500mm, Y-Axis – 500x500mm, Y-Axis – 750x750mm, Y-Axis – 750x1000mm / 1000x1000mm, Y-Axis – 1000x1500mm / 1500x1500mm, Z-Axis – 500x500mm, Z-Axis – 750x750mm / 750x1000mm, Z-Axis – 1000x1000mm / 1000x1500mm, Z-Axis – 1500x1500mm |
|---|
Technical Specification
Wire Lengths
| Wire | Length |
| X-Axis – 500x500mm / 750x750mm / 750x1000mm | 1055mm |
| X-Axis – 1000x1000mm / 1000x1500mm | 1330mm |
| X-Axis – 1500x1500mm | 1785mm |
| Y-Axis – 500x500mm | 1330mm |
| Y-Axis – 750x750mm | 1605mm |
| Y-Axis – 750x1000mm / 1000x1000mm | 1785mm |
| Y-Axis – 1000x1500mm / 1500x1500mm | 2335mm |
| Z-Axis – 500x500mm | 1055mm |
| Z-Axis – 750x750mm / 750x1000mm | 1330mm |
| Z-Axis – 1000x1000mm / 1000x1500mm | 1605mm |
| Z-Axis – 1500x1500mm | 2155mm |
Specification
| Termination | Common (C) and Normally Closed (NC) |
| Dimensions | 20 x 11 x 6mm |
| Mounting Hole Diameter | 2mm |
| Centre to Centre Mounting Hole Spacing | 9.5mm |
| Controller Connector | Molex 22-01-1032 Pin 1 - Ground Pin 2 - Empty Pin 3 - Signal |
11 reviews for Original WorkBee Replacement Limit Switches
Only logged in customers who have purchased this product may leave a review.
Related products
(1)
£5.00 Ex VAT: £4.17
Taxes Calculated at Checkout
(7)
From: £2.10
Ex VAT: £1.75
Ex VAT: £1.75
Taxes Calculated at Checkout
(3)
From: £183.00
Ex VAT: £152.50
Ex VAT: £152.50
Taxes Calculated at Checkout
(1)
£3.25 Ex VAT: £2.71
Taxes Calculated at Checkout
(6)
From: £1.00
Ex VAT: £0.83
Ex VAT: £0.83
Taxes Calculated at Checkout
(2)
£3.25 Ex VAT: £2.71
Taxes Calculated at Checkout
(1)
£13.20 Ex VAT: £11.00
Taxes Calculated at Checkout
£60.00 Ex VAT: £50.00
Taxes Calculated at Checkout
Robert Sweetness (verified owner) –
On time and fitted
Phil Neri (verified owner) –
Always there to help in any way.
thank you ooznest.
Sarah Bishop (verified owner) –
Just what i needed and super fast delivery
FabLab Wageningen (verified owner) –
Works as advertised. a good replacement for a original limit switch which was lost due to wiring being damaged by a drag chain. but here’s the issue: the wiring is way too thin and too thinly isolated for rugged use. any – even very small – aberration in mounting and the wiring will get damaged again and you need to go though the replacement process again. a sturdier design and make would just be soo much better….
Stephen Morgan (verified owner) –
Replacement blade far too expensive
Mr David Sanderson (verified owner) –
Working well, delivery was very fast.
bought a spare incase needed but so far not needed.
Jonathan Gomez (verified owner) –
Good product
June Griffiths (verified owner) –
Always spot on with advise and quick delivery for parts, would recommend
Mr David Sanderson (verified owner) –
Replacement original part, delivered next day all for less than £4.00 what is not to like?
Richard Sleep (verified owner) –
Great products would recommend
Sebastien ARTUSSE (verified owner) –
Do the job