Solid V Xtreme Wheels are made from super hard polycarbonate which will resist compression and wear and lead to better precision for your machines.
Solid V Xtreme Wheels are a heavy duty alternative to Delrin V Wheels in applications such as CNC Routers/Mills, Solid V Xtreme Wheels can be used where heavier loads are required with minimal compression.
These wheels have been tested at 11kg with no noticeable deflection.
-Wheel Option: Wheel Only OR Wheel Kit which includes:
- 1 x Solid V Xtreme Wheel
- 2 x 625 2RS Bearings
- 2 x Precision Shims
- 1 x M5 Nyloc Nut
- Bolt: M5 Low profile bolt, 25mm for 1/8" plate OR 30mm for 1/4" plate.
- Spacer: Choose between an Aluminium spacer or Eccentric Spacer, in either 6mm or 1/4" length. 1/4" gives slightly more clearance under the gantry. On a usual setup you will have Aluminium Spacers on one side of the gantry, and matching Eccentric Spacers on the other side to remove any wobble.
You can choose 'None' on both bolt and spacer options and buy other sizes of M5 Low Profile Bolts and Aluminium Spacers to suit your machine requirements.
Note: HTML is not translated!
Rating: Bad Good
Copyright © Ooznest Ltd 2018 - All Rights Reserved