The Prusa i3 is one of the most popular printers out there, either a kit version, or a complete DIY Setup. This kit enables you to quick upgrade your Prusa i3 to the a E3D V6 Hotend and Titan Extruder. The E3D V6 is the workhorse of the E3D ECO System, and is the most reliable hotend for your 3D Printer. Combining this with the Titan hotend makes for one of the best extrusion systems on the market.
Everything to upgrade your Prusa to the V6 is included, even the stepper motor. An assembled version is also available.
Please read the below requirement to check this is compatible with your Prusa i3:
- 8mm Smooth Rods using LM8UU Bearings
- 45mm Rods spacing with rouhgly 15mm belt spacing
- One bearing on the top rod and two on the bottom. Vice versa will also work
Owners of the original Prusa i3 from Josef Prusa please note that the i3 uses the Lite6, the V6 is drop in compatible. So this upgrade kit wouldn't be needed unless you want to use the Titan Extruder.
Note: HTML is not translated!
Rating: Bad Good
Copyright © Ooznest Ltd 2018 - All Rights Reserved