E3D Online Volcano – Super Fast Printing – Genuine | UK

E3D Volcano

E3D Volcano

The Volcano unlocks your 3D printer's potential, it unlocks the ability to print super fast, with huge layer heights. The E3D Volcano uses your existing E3D heatsink but supercharges your melt rates, allowing for print speeds never seen before, with strong layer adhesion.

The E3D Hotends are already top of their class, but the Volcano heater block takes them to a new level. 3D Printers are inherently slow, large printers are held back by the hotend melt rates. The E3D Volcano was specially developed for large 3D Printers, and allows you to complete prints in a fraction of the time, with superior strength.

E3D Volcano Heater Block
Volcano Nozzle

Volcano E3D Hotend Addition

The Volcano is E3D's newest addition to their ECO system. The Volcano is compatible with v6 and Lite6 3D printer hotends. A new range of extra long nozzles have been developed to accommodate the fast print speeds. These are available from 0.40 – 1.20mm in both brass and hardened variants, just like the v6 nozzles.

At Ooznest we want to have all the parts you need to build the 3D printer you want. Our team have worked hard to bring the complete range of E3D Volcano products to our site, from the kits to spare parts. You can be sure that no matter how small the item, we will have it in stock. If you need more information, or have any questions, please contact us today.

Prices Shown Include VAT

ListGrid
Show:
Sort By:
E3D Volcano Starter Kit
AboutThe E3D Volcano gives you the opportunity to venture into large format, super fas..
£30.00
Ex Tax: £25.00
E3D Volcano Eruption Pack
AboutThe E3D Volcano gives you the opportunity to venture into large format, super fas..
£36.00
Ex Tax: £30.00
E3D Volcano Brass Nozzle
Volcano brass nozzles are specially designed for fast printing when using the E3D Volcano heat..
£5.40
Ex Tax: £4.50
E3D Volcano Hardened Nozzle
Abrasive filaments, such as carbon fibre filled, will cause rapid wear out and quickly damage ..
£18.00
Ex Tax: £15.00
E3D Volcano Heater Block
Spare E3D Volcano heater block. The E3D Volcano gives you the opportunity to venture into large form..
£18.00
Ex Tax: £15.00
E3D Cartridge Heater
E3D Replacement 30w ceramic cartridge heater, heat your hotend up quickly with this powerful unit. C..
£5.40
Ex Tax: £4.50
E3D Thermistor Cartridge
The thermistor cartridges place the tried and tested 104GT thermistors into a convenient cartridge b..
£5.40
Ex Tax: £4.50
E3D Nozzle Spanner
Do you tinker with your hotend often changing nozzles? This spanner makes changing your E3D v6 nozzl..
£0.96
Ex Tax: £0.80
E3D PT100 Amplifier Board
Want to print at high temperatures than 300ºC and also have more accurate readings? Then the PT..
£18.00
Ex Tax: £15.00
E3D PT100 Sensor Cartridge
Much higher temperatures and better accuracy is achievable with a PT100 temperature sensor. PT100 se..
£15.00
Ex Tax: £12.50
E3D Bowden Adaptor
Using a bowden adaptor is a very tidy solution for bowden based 3D printers. A bowden adaptor easily..
£5.40
Ex Tax: £4.50
E3D Threaded Bowden Coupler
These handy pneumatic couplers screw directly into a bowden heatsink or any plastic part to make it ..
£1.80
Ex Tax: £1.50
E3D Embedded Bowden Coupler
These handy pneumatic couplers embed directly into a aluminium part to make it accept PTFE Tubing. ..
£1.80
Ex Tax: £1.50

About

A revolution is coming… one where our 2D thoughts are turned into 3D realities and where you have full control of your creative experiments, with a little help from an online expert community that loves to share what we do. Ooznest is a proud cog in that machine - supplying the 3D printing community with what they need to grow and thrive.

Contact

  • 01277523171
  • sales@ooznest.co.uk

Twitter

Facebook

Copyright © Ooznest Ltd 2016 - All Rights Reserved