E3D Titan Aero Extruder – 3D Printer – Genuine | UK
E3D Titan Aero Kit
E3D Titan Aero Kit

E3D Titan Aero Kit

£108.00
Ex Tax: £90.00
Brand: E3D Online
Product Code: E3D-TA
Availability: In Stock
Qty:

Available Options

* Voltage:
* Filament Diameter:
* Nozzle Size:
* Extras:
* Orientation:
* Motor:
Total:

E3D Titan Aero Kit

About

The idea for Titan Aero came after back in March 2016 E3D Launched the Titan extruder, which has become known for its performance and reliability. The next logical step was to integrate a hotend into the Titan and make it into an all-in-one compact hotend-extruder package. The E3D Titan Aero was born.

The Titan Aero is a Titan Extruder, but the lid has been replaced with an aluminium heatsink. The heatsink has been carefully designed to give you all the performance of a V6 Hotend and then some. The Titan Aero still keeps the 3:1 gear reduction to provide extreme power. The gear ratio allows for smaller, lighter motors to be used, you will still get the same pushing force with a ungeared lighter motor, than when using an geared large motor.

The Titan Aero is a perfect addition to the E3D ECO System. It still retains the V6 threaded heatbreak, so all the V6 Heater blocks, Sensors, and Nozzles are fully compatible, basically just the same as using a full V6 Hotend.

Compact and Rigid

Titan Aero Rigid

By combining the Titan and V6 into a single package it has made the overall system 25mm shorter, meaning 25mm of greater print height! With a V6 and Titan combo the hotend is simply held in place using a groovemount, but with the Titan Aero because the hotend is fully integrated and bolted onto the extruder it is extremely rigid. The Titan Aero will much more accurately follow the motion system of a 3D Printer, even at very high accelerations.

Accurate and Reliable

There is an even greater advantage to the 25mm reduction in length, this means a 25mm shorter filament path. This is important because 3D Printer filament acts like a spring, so when you start to extrude there is a time lag between when the hobbed pulley moves, and when the filament will extrude from the nozzle, the same applies when you finish extruding. Therefore the Titan Aero is a much more responsive system leading to overall better print quality.

The Titan Aero has a fully guided filament path, with no gaps for buckling of flexible filaments. The fully constrained path from extruder to meltzone means flexible filaments are now very easy to print and pain free.

The heatsink on the Titan Aero can dissipate just as much heat as the V6, it has also been rigorously tested in a whole range of environments to insure, that like with the V6, jams are a non-issue.

E3D Titan Aero Filament Path

Easy To Use and Maintain

E3D V6 High Quality Printing

With an adjustable tensioner system you can easily set the desired tension to a repeatable value. With a quick release lever on the idler, the extrusion can be easily stopped or filament changed.

The Titan Aero was designed with maintenance in mind. The hobbed pulley is open, and easily accessible for cleaning with out taking the extruder apart. The shape of the drive gear teeth have been specially designed so filament debris flakes off cleanly. The accessible thumb wheel makes manual extrude, purge, and filament changes a breeze. The inside of the Titan can be accessed within one minute, using only one allen key. It reassembles just as quickly.

What You Will Be Getting

Everything needed to build the Titan Aero Extruder. By default Titan Aero comes without a motor, mounting bracket or spacer. If bought with a motor, a 2mm PLA printed plastic spacer will be included, unless the mounting bracket is also chosen.

Titan Aero Assembly Parts

Write a review

Your Name:

Your Review:

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

About

A revolution is coming… one where our 2D thoughts are turned into 3D realities and where you have full control of your creative experiments, with a little help from an online expert community that loves to share what we do. Ooznest is a proud cog in that machine - supplying the 3D printing community with what they need to grow and thrive.

Contact

  • 01277523171
  • sales@ooznest.co.uk

Twitter

Facebook

Copyright © Ooznest Ltd 2017 - All Rights Reserved