To save you time and effort we now offer a cutting service for a price of £1.20 Inc Vat per precision length, the instructions below will outline how to use our cutting service.
1) If you do not want a cutting service, in the option box “Cutting Service” please select “No” and we will ship your C-Beam as a full length. If you want us to cut your C-Beam please select “Yes”
If you selected “Yes” please work out the number of precision lengths you need (Do not count offcuts as a precision length). For instance if you want a 1000mm C-Beam cut in to 2 x 200mm + 1 x 550mm + a offcut, this is 3 precision lengths, we will still send you the offcuts.
The total length of all the precision lengths added together must be less than the total rail length, please bear in mind that the blade we use to cut the rails has a thickness of 3mm, for example if you require 3 precision lengths, this requires 3 cuts, hence the maximum length of rail you have to work with is reduced by 3 x 3mm = 9mm. Check that your lengths satisfy the formula below
(Total length of precision lengths) “IS LESS THAN” (Rail Length) – (Number of Precision Lengths * 3mm)
2) In the option box “Number of precision lengths” please enter the number of precision lengths you want.
3) Fill out the boxes labeled “length 1” “length 2” etc, with the precision lengths you want, for instance in the example above you would enter 200mm into “length 1”, 200mm into “length 2”, and 550mm into “length 3”, leave any boxes not needed empty. Only enter Whole numbers and do NOT enter the offcut length into any box.
4) If you require multiples of the same rail, with the same cuts, just increase the quantity. i.e Only enter cuts for 1 rail and use the quantity field to order this multiple times.
Standard C-Beam lengths come with the required holes on the ends tapped for M5 Bolts and compatibility with C-Beam end mounts. If you choose our cuting service, you will loose these threads.
Our re-tapping service, will re-tap these ends for full compatibility with M5 Bolts and C-Beam end mounts. The price for this service is £3.60 Inc Vat per precision length, 2 Ends - 8 Holes in total. For instance if you choose to have 3 precision lengths, our re-tapping service will cost 3 x £3.60 = £10.80 Inc Vat. Offcuts will not be tapped.
Note: HTML is not translated!
Rating: Bad Good
Copyright © Ooznest Ltd 2017 - All Rights Reserved