Borosilicate 3D Printer Glass Build Plate – Cut To Size

Borosilicate Glass Build Plate - Cut To Size

£16.00
Ex Tax: £13.33
Brand: Ooznest
Product Code: BGCUTTOSIZE
Availability: In Stock
Qty:

Available Options

* Thickness:
* X Dim (mm):
* Y Dim (mm):
* Corners Chamfered?:
C Dim (mm):
Total:

Borosilicate Glass Build Plate - Cut To Size

About

Borosilicate glass is not like normal glass. With borosilicate glass the main constituents are silica and boron trioxide. This combination gives borosilicate glass very low coefficient of thermal expansion, this makes it resistant to thermal shock and thermal stresses. Historically borosilicate glass is commonly used to make test tubes, however with the advent of 3D Printers, it has found a new application.

An ideal 3D Printer build surface needs to be perfectly flat, and glass is a good candidate for this. However normal window glass will expand under the temperature fluctuations of a 3D Printer heated bed. If it is constrained around the edges (i.e bulldog clips) this can cause it to bow in the Z Direction and effect your print quality; even worse it will crack. Using borosilicate glass overcomes these pitfalls from using normal glass, and is the ideal solution for 3D Printer build platforms.

We can guarantee that the glass we sell is genuine borosilicate glass, many suppliers of so called borosilicate glass, are in fact supplying soda lime glass. The difference can be easily spotted, soda lime has a blue tinge around the edges, whereas borosilicate glass has a slight yellow tinge.

Borosilicate Glass

The Glass You Have Always Wanted

3D Printer Glass Cut To Size

With hundreds of printers now available with a large variety of different bed sizes we realised that every 3D Printer owner will want a bespoke size. Furthermore genuine borosilicate glass is very hard / impossible to cut using traditional scoring techniques.

Therefore we now offer a borosilicate glass cutting service and have invested in the machinery needed to precisely cut borosilicate glass to the exact size that you require for your 3D Printer. Once we have cut the glass we chamfer the edges to insure there is no chance of fingers getting hurt.

In addition we recognize that many printer designs have a bolt head in each corner of the printer platform, this prevents you from using a piece of square glass that maximizes your build envelope. So you no longer waste them extra few millimeters, we are also offering an optional corner chamfering service.

Using Our Cutting Service

Cut To Size Only

Looking at the diagram to the right, measure the X and Y Dimensions of your print platform and enter them into the input boxes above labeled X Dim (mm) and Y Dim (mm). Under 'Corners Chamfered?' select 'No', and leave the input box labeled C Dim (mm) empty.

Currently the biggest size we can cut is 400x400mm.

Cut To Size Borosilicate Glass

Cut To Size & Corners Chamfered

Looking at the diagram to the right, measure the X and Y Dimensions of your print platform and enter them into the input boxes above labeled X Dim (mm) and Y Dim (mm).

Measure the C Dimension in the diagram to the right. The chamfers will be cut at 45 Degrees, so make sure the C Dimension is big enough that the 45 Degree cut edge will not hit the bolt. In the above options, under 'Corners Chamfered?' select 'Yes (+£3.60 Inc VAT)', and enter your measured C Dimension into the input box labeled C Dim (mm).

You could also use this chamfer service to create octagonal plates for circular build plates.

Currently the biggest size we can cut is 300x300mm.

Chamfered Glass Build Plate

Write a review

Your Name:

Your Review:

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Related Products

About

A revolution is coming… one where our 2D thoughts are turned into 3D realities and where you have full control of your creative experiments, with a little help from an online expert community that loves to share what we do. Ooznest is a proud cog in that machine - supplying the 3D printing community with what they need to grow and thrive.

Contact

  • 01277523171
  • sales@ooznest.co.uk

Twitter

Facebook

Copyright © Ooznest Ltd 2017 - All Rights Reserved