From the 25th - 28th September, some of the Ooznest team are at the TCT Show 2017. Due to this there will be some delays in answering phoncalls and emails. During this period the best way to contact us would be by email. However we promise to get around to everything, it just may take longer than usual. Thanks Ryan Lock - Ooznest.
Minimal tools are needed, 4/2.5/1.5mm allen keys, 8mm Spanner, and Scissors.
This is a very simple kit to build. Mark Carew, of Openbuilds, has made an excellent instruction video showing you how to build this linear actuator. This video can be found in the tab named “Instructions” directly under the thumbnail pictures above.
Everything to build a Mini V Linear Actuator as to Mark Carew's specification, with the options chosen above. A NEMA17 stepper motor is an optional addition, if you choose not to have a NEMA17 stepper motor, you will still get the mounting hardware, belt, and pulley.
Check the "Parts List" tab above to see what exactly you will be getting
Note: HTML is not translated!
Rating: Bad Good
Copyright © Ooznest Ltd 2017 - All Rights Reserved