From the 25th - 28th September, some of the Ooznest team are at the TCT Show 2017. Due to this there will be some delays in answering phoncalls and emails. During this period the best way to contact us would be by email. However we promise to get around to everything, it just may take longer than usual. Thanks Ryan Lock - Ooznest.
D-Bot 3D Printer
The D-Bot 3D Printer is based on the C-Bot by Carl Feniak on the Openbuilds forum. The C-Bot is a Core XY 3D Printer designed using the Openbuilds V-Slot extrusion system and other opensource hardware. The design goals of the C-Bot were to make a clean, adaptable, & customisable 3D Printer.
The D-Bot is one of the most popular and well documented iterations of the original C-Bot. The D-Bot was designed by Spauda01 on Thingiverse, and has not only created a truly great printer, but has written a comprehensive instruction manual, bill of materials, and firmware.
The aims of the D-Bot 3D printer are to create a more stabilised cantilevered build platform and reduce the cost of the printer by making design changes that did not impact on performance.
The D-Bot has a build volume of 300 x 200 x 325mm, uses the V-Slot extrusion through out, can be easily accessed/modified, and has a massive community behind it.
Through popular demand we have decided to offer various bundles for the D-Bot 3D Printer. Note that these are only bundles we are offering, and should not be classed as kits.
A revolution is coming… one where our 2D thoughts are turned into 3D realities and where you have full control of your creative experiments, with a little help from an online expert community that loves to share what we do. Ooznest is a proud cog in that machine - supplying the 3D printing community with what they need to grow and thrive.